1pcs Screen Protector for Anycubic Photon Mono X 6Ks 196.5 x 124.5 mm
Description
1pcs Screen Protector for Anycubic Photon Mono X 6Ks 196.5 x 124.5 mm is a replacement transparent protective film for the LCD screen of the Anycubic Photon Mono X 6Ks resin 3D printer. The film is installed over the LCD screen and helps protect it from scratches, dust, resin residue and accidental mechanical damage.
During resin 3D printing, the LCD screen is located under the resin vat and works in a high risk area. If the vat film is damaged, resin leaks, a print fails or hard particles get between the vat and the screen area, the LCD screen may be damaged. A screen protector creates an additional barrier between the working area and the LCD screen surface.
This screen protector is compatible with Anycubic Photon Mono X 6Ks and has film dimensions of 196.5 x 124.5 mm. It is used as a protective consumable accessory during printer maintenance and helps extend the service life of the LCD screen.
Advantages
- Compatible with Anycubic Photon Mono X 6Ks
- Film dimensions 196.5 x 124.5 mm
- Package includes 1 piece
- Protects the LCD screen from scratches and contamination
- Helps reduce screen damage risk in case of resin leakage
- Suitable for preventive printer maintenance
- Transparent film does not interfere with normal exposure system operation
- Helps keep the screen area under the resin vat clean
- Suitable for replacing an old or damaged screen protector
Technical Specifications
| Product name | 1pcs Screen Protector for Anycubic Photon Mono X 6Ks 196.5 x 124.5 mm |
| Full product name | 1pcs Screen protector for Anycubic Photon Mono X 6KS |
| SKU | S020077 S020140 |
| Part type | LCD screen protector film |
| Compatibility | Anycubic Photon Mono X 6Ks |
| Film dimensions | 196.5 x 124.5 mm |
| Quantity | 1 pcs |
| Purpose | Protection of the LCD screen from resin, scratches, dust and mechanical damage |
| Printer type | LCD resin 3D printer |
| Category | Screen protectors for Anycubic resin 3D printer LCD displays |
When to Replace the Screen Protector
- The film has scratches, wear marks or visible damage
- The film starts peeling from the edges
- Resin residue or contamination remains on the surface
- The film becomes cloudy after resin leakage
- The old protector was removed during printer maintenance
- Additional protection is needed before installing a new LCD screen
- Bubbles, folds or cloudy areas appear on the protector
- The film affects exposure uniformity because of contamination or damage
Compatibility
This screen protector is intended for Anycubic Photon Mono X 6Ks. Before ordering, check the printer model, film dimensions 196.5 x 124.5 mm and SKU S020077 S020140. Anycubic Photon Mono X, Photon Mono X2, Photon M3 Plus, Photon M3 Max, Photon Mono M5s, Photon Mono M7 and other models may use screen protectors with different dimensions.
Important Difference
This product is a screen protector for the LCD screen. It is not the LCD screen itself and it is not FEP film for the resin vat. The screen protector is installed on the printer screen, while FEP, NFEP or ACF film is installed in the resin vat. Before ordering, check the printer model and the 196.5 x 124.5 mm dimensions.
Installation Recommendations
- Turn off the printer completely and disconnect the power before installation
- Remove the resin vat and build platform
- Clean the LCD screen surface from dust and resin residue
- Do not use sharp tools to clean the screen
- Before applying the film, make sure there are no hard particles on the surface
- Apply the film evenly without misalignment or folds
- Smooth the film carefully to remove air bubbles
- After installation, check that the film does not cover the active screen area incorrectly
- Run an exposure test before printing
Usage Recommendations
- Check the screen protector condition before every important print
- Do not allow liquid resin to get under the film
- After a failed print, check the vat bottom for cured resin residue
- Do not clean the protector with metal scrapers or knives
- Use a soft wipe to remove dust
- Replace the protector before the next print if it is damaged
- Do not start printing if bubbles or heavy contamination appear in the active screen area
- Check the FEP or NFEP vat film condition regularly to prevent resin leakage
Suitable Applications
- Protecting the LCD screen of Anycubic Photon Mono X 6Ks
- Preventive resin 3D printer maintenance
- Replacing a damaged screen protector
- Protecting the screen after a new LCD module installation
- Reducing screen damage risk in case of resin leakage
- Preparing the printer for regular photopolymer resin printing
FAQ
Is this screen protector compatible with Anycubic Photon Mono X 6Ks
Yes, this screen protector is intended for Anycubic Photon Mono X 6Ks.
What are the film dimensions
The film dimensions are 196.5 x 124.5 mm.
How many protectors are included
The package includes 1 screen protector.
What is the SKU of this screen protector
This product is listed with SKU S020077 S020140.
Is this an LCD screen or a screen protector
This is a screen protector for the LCD screen. The LCD screen itself is not included.
Is this FEP film for the resin vat
No, this is not FEP film for the resin vat. This protector is installed on the printer LCD screen.
When should the screen protector be replaced
The protector should be replaced if scratches, cloudiness, bubbles, peeling, resin contamination or mechanical damage appears.
Should I run an exposure test after installation
Yes, after installing the screen protector, run an exposure test to confirm correct installation and no defects in the active screen area.